Gas Pistol Parts...
Reinforced Loading Nozzle's & Piston head's
Guarder Loading Nozzles
The Guarder reinforced loading nozzle for Tokyo Marui Hi Capa, 1911A1/MEU, Sig 226 & Glock 18 far stronger than the original part making malfunction far less likely.
Please not that reinforced loading nozzles, are not supplied with any internal parts, you need to swap over the spring, valve and valve blocker from your existing one.
Price: £15.00p
Special Price Guarder loading nozzle for TM G18 £9.00
TM Loading nozzle springs for most models, All Hi Capa, 1911/MEU, P226, PX4 and G17/18 £3.00 each
Guarder piston heads...
Guarder ones for P226, G18/ G26, Strike Warrior & Detonics
£3.00
Standard Tokyo Marui replacement piston head, for all Hi Capa, MEU,1911's, and PX4 £6.00
Magazine lips, Gas routers & hop rubbers.
Shooters Design reinforced magazine lips for Tokyo Marui Hi Capa series magazines. The purple ones,
Price: £9.00p.
Std Hi Capa lips black also available @ £4.00, I also have std TM ones for MEU, 1911, G17/18, P226 and PX4 @ £4.00 each
TM lips for 50rd Hi capa magazine £5.00
TM mag seal (gas router) £4.00, for Hi Capa, M1911/MEU and P226
Replacement hop rubbers, for TM Hi Capa, 4.3, 5.1, M1911, MEU, P226, G17 and 18, Desert Warrior, Knight Warrior and Detonics, same one fits all.
Price: £6.00 each
Nine Ball, gas router (mag seal) the purple one's. This is the best £7.00 you will ever spend on upgrading your pistol. I did not believe the hype, that a simple bit of purple rubber could give me up to 24 more FPS, But its true, having tested these in various Hi Capa magazines I got increase's in power from around 15fps up to 24fps. At present only for Hi Capa 4.3 and 5.1 and TM P226 magazines, They do not fit MEU, Night Warrior or M1911's these are highly recommended. Its all down to the gas flow, look inside your normal gas router and you will angles and edges, the inside of these is perfectly smooth and round.
Used along side the Nine Ball hop rubber, up to 40more fps was achieved.
Price £7.00 each
Nine Ball uprated hop rubber for TM Hi Capa, 1911, MEU, G17 and Sig P226, for improved power (approx 15fps)and consistancy from shot to shot and also a perfect replacement if you have a damaged hop!
If used along with the Nine Ball gas router you can achieve up to more then 40 extra fps
Price: £15.00p
PDI hop rubber, for TM Hi Capa, 1911, P226, PX4, Glock etc, gives more FPS and longer range £12.00
Original TM hop rubbers, black £4.00 each
TM BB followers, for Hi Capa, MEU/1911, PX4, P226 etc £4.00 each
TM O rings for TM Hi Capa magazines and all 1911/MEU mags £3.00 each
Ordering
To place an order with us you will need to contact us either:
by telephone on: 07816 992417 or via e-mail on: mikecripps50@aol.com
We accept Paypal, cheques, credit cards and most debit cards.